Electrical Training Overview
Universal Academy is proud to offer introductory and jobsite skill trainings for those who are interested in learning more about the electrical trade and the career possibilities available. We have designed an 80-hour course which takes the trainee through the basics of electrical knowledge and skill. Our objective for this course is for the trainee to gain better understanding of the electrical field, the hazards involved, and hands on skill required so that they may wish to start a career in the electrical field or become more productive workers on and jobsite.
It is our belief that craft knowledge is obtained through instruction, recalled through repetition, and reinforced through hands on application of practical knowledge. Our training is built upon the foundation of the NCCER curriculum, which is approved by the state of Pennsylvania for training towards a journey workers certificate. Should any trainee wish to enter the apprenticeship training program, all completed training for this course would be allowed to transfer as credit towards completion
See our course descriptions and calendar and register for your 80-hour course and start your electrical training today!
Introduction to Electrical – 80 Hour
Universal Academy’s 80-hour Introduction to Electrical course is designed for those who are interested or curious about the electrical field, but don’t have the background and hands on experience with tools or other aspects of the construction industry. Trainees enrolled in this course learn the following:
- What the electrical trade can offer them in terms of a career with multiple career paths.
- A knowledge of electrical hazards that exist on jobsites and OSHA’s requirements for electrical safety.
- A basic understanding of how electrical circuits work and calculations usings Ohm’s and Kirchoff’s laws.
- Gain an understanding of how to read electrical drawings, schematics, and prints.
- How to use, maintain, and select trade related hand tools and power tools.
- Be able to do basic wiring, terminations, box sizing, and cable/wire management.
- How to select, use, and maintain electrical testing equipment to provide accurate readings and safe work conditions.
Cost for this 80-hour training is just $1300.00
Electrical Workforce Training – 80 Hour
Universal Academy’s 80-hour Electrical Workforce Training course is designed for those who are either entering the electrical field or are currently an active worker looking for additional skills to help further their knowledge and abilities. This course focuses on the necessary skills and knowledge required for commercial and industrial helpers in the electrical field to help them be more productive on jobsites or desirable possible applicants. The goal of this course is to create jobsite ready helpers who produce at a high level and put themselves in position to enter an apprenticeship program. Trainees enrolled in this course learn the following:
- A knowledge of electrical hazards that exist on jobsites and OSHA’s requirements for electrical safety.
- A basic understanding of how electrical circuits work and calculations usings Ohm’s and Kirchoff’s laws.
- Gain an understanding of how to read electrical drawings, schematics, and prints.
- Obtain the ability to hand bend offsets, 90 bends, 3 and 4-point saddles, and kicks using a EMT hand bender
- Be able to identify, select and use different types of raceway systems, along with their fittings, components, and fasteners
- Be able to do basic wiring, terminations, box sizing, and cable/wire management.
- How to select, use, and maintain electrical testing equipment to provide accurate readings and safe work conditions.
- Provide students with the proper support and methods to assist them in their search for employment.
Cost for this 80-hour training is just $1300.00
Upcoming Courses
Coming Soon
Course Curriculums
| Introduction to Electrical 80-Hour |
Electrical Workforce Training 80-Hour |
|---|---|
|
1. Orientation to the Electrical Trade Provides and overview of the electrical craft and discusses the career paths available to electricians, included apprenticeship requirements. 2. Electrical Safety Discusses hazards and describes the various types of personal protective equipment (PPE) used to reduce injuries. Covers the standards related to electrical safety and the OSHA-mandated lockout/tagout rule. 3. Electrical Theory Introduces basic circuits, as well as the methods for calculating the electrical energy within them. Covers resistive circuits, Kirschoff’s voltage and current laws, and circuit analysis. 4. Basic Electrical Construction Drawings Describes how to interpret electrical drawings, including the use of architect’s and engineer’s scales. 5. Hand Tools The constructions crafts require a broad array of hand tools. Even if you are familiar with some of the tools, all craftworkers need to learn how to select, maintain, and use them safely. A quality hand tools may cost more up front, but if it is properly used and maintained, it will last for years. A true craft professional invests wisely in hand tools, and uses, maintains, and stores them with the same wisdom. 6. Power Tools Thousands of construction workers across the world use power tools everyday to make holes, cut different types of materials, smooth rough surfaces, and shape a variety of products. Regardless of the specialization, all construction workers eventually use power tools on their job. This module provides and overview of the common types of power tools and how they function. It also describes the proper techniques required to ensure their safe and efficient operation. 7. Conductor and Cables Discusses conductor types, cable markings, color codes, and ampacity derating. Describes how to install conductors using fish tape and power conduit fishing systems. 8. Device Boxes Describes the various types of boxes and explains how to calculate the NEC® fill requirements for outlet adjunction boxes under 100 cubic inches. 9. Electrical Test Equipment Covers the applications of various types of electrical test equipment. Describes meter safety precautions and category ratings. |
1. Electrical Safety Discusses hazards and describes the various types of personal protective equipment (PPE) used to reduce injuries. Covers the standards related to electrical safety and the OSHA-mandated lockout/tagout rule. 2. Electrical Theory Introduces basic circuits, as well as the methods for calculating the electrical energy within them. Covers resistive circuits, Kirschoff’s voltage and current laws, and circuit analysis. 3. Basic Electrical Construction Drawings Describes how to interpret electrical drawings, including the use of architect’s and engineer’s scales. 4. Hand Bending Covers methods for hand bending conduit, including 90-degree bends, back-to-back bends, offsets, and saddle bends. Describes how to cut, ream, and thread conduit. 5. Wireways, Raceways, and Fittings Introduces various types of raceway systems, along with their installation and NEC® requirements. Describes the use of various conduit bodies. 6. Conductors and Cables Discusses conductor types, cable markings, color codes, and ampacity derating. Describes how to install conductors using fish tape and power conduit fishing systems. 7. Electrical test Equipment Covers the applications of various types of electrical test equipment. Describes meter safety precautions and category ratings. 8. Employability Skills Becoming gainfully employed in the construction industry takes more preparation than simply filling out a job application. It is essential to understand how the construction industry and potential employers operate. Your trade skills are extremely important, but all employers are also looking for those who are eager to advance and demonstrate positive personal characteristics. This module discussions the skills needed to pursue employment successfully. |
Registration
Testimonials
“The electrical training with Universal Academy was a big stepping stone to my success in the industrial electrical field. The program helped me learn different types of material that is used on industrial job sites as well as how to use different types of equipment such as benders and threaders. The program is a great way to get some prior knowledge before jumping into the electrical field.”
Justin R. – 4th Year Apprentice – Universal Electrical Service
Payment
Full payment is due 3 weeks prior to the start of any class date.
ACADEMY LEADERSHIP
